Slalom poles

General slalom chatter...rant about the bad, rave about the good
Post Reply
JohnMac
Posts: 26
Joined: Sat Jun 12, 2004 5:43 pm

Slalom poles

Post by JohnMac » Fri Sep 13, 2013 10:03 am

Cheltenham CC need to colour red/green stripes on plastic slalom poles for Symonds Yat slalom 2014. Can you share details of a supplier of sticky back red and green plastic suitable for the task? Or, have you a robust paintwork solution?

jke
Posts: 119
Joined: Mon Oct 24, 2005 7:33 pm

Re: Slalom poles

Post by jke » Fri Sep 13, 2013 11:26 am

For plastic poles I use red and green sticky back plastic obtained from my local department store. Looking on the back it says d-c-fix. Just google that and you get eg. http://stores.ebay.co.uk/vinyldepot

You may already know this but with plastic poles to ensure a sensible weight put concrete in the bottom - glue a foam plug in the bottom, then using a large funnel pour dry concrete mix in, followed by water.

John, Gloucester Canoe Club used to have a full set of poles (they ran S Yat and Elan Valley in the 70's). I wonder where they are hiding.
John Kent

JohnMac
Posts: 26
Joined: Sat Jun 12, 2004 5:43 pm

Re: Slalom poles

Post by JohnMac » Fri Sep 13, 2013 5:09 pm

Good info thanks. Any more tips? Other than plumb waste tube has somebody has a recommendation for thicker non-bendy plastic tube?

User avatar
bankside
Posts: 61
Joined: Tue Aug 02, 2011 1:12 pm
Location: GB

Re: Slalom poles

Post by bankside » Tue Sep 17, 2013 1:24 am

broom handles, not fork handles.
:!:

Post Reply